Mila Air Purifier – Smart Features You Could Only Imagine!

Full Review

The Mila air purifier is perfect for those seeking a truly smart, highly efficient, and good-looking device.

It’s one of the smartest air purifiers on the market, making every other smart air purifier look imperfect in comparison.

Another standout feature of the Mila is its seven different filtration options and its use of one of the most reliable air quality sensors I’ve seen in an air purifier.

Yes, it costs a bit more than many similar or even higher-performing air purifiers, but with the Mila, you’re not just getting an air purifier—you’re getting a truly smart air quality assistant.

Now, let’s dive into our test results to see just how well the Mila performs.

How We Tested the Mila?

1. For the filter efficiency testing, we used the Temtop LKC-1000S laser particle meter, which measures PM2.5 (µg/m3), PM10 (µg/m3), Particles (per/L), and HCHO (mg/m3) in the air, and also calculates the AQI.

2. We placed the Mila in two separate performance tests, one in a 194 sq. ft. (18 m²) room and the other in a 320 sq. ft. (30 m²) room. Then, we recorded the initial air quality values using the Temtop laser particle meter and let the Mila run at maximum speed.

3. After 60 minutes, we measured the new values using the Temtop laser particle meter and saved the data.

4. Next, we placed the Mila in a glass box, which we then filled with smoke. Then, we measured how much time was needed for the air purifier to remove all the smoke from the box.

5. Using a special noise measurement tool, we tested the air purifier’s noise level at all speeds. We measured the noise level on the dBA scale.

6. Finally, we measured the power usage at all speeds using an energy meter, after which we calculated how much it would cost to use the device at a particular fan speed for one month. For reference, we used an energy price of $0.12 per kWh.

The official Mila website states that the Mila air purifier has a CADR of 447 m³/hr.

However, I rely on EnergyStar as the most trusted source for air purifier CADR ratings. According to EnergyStar, the Mila air purifier has a CADR of 140 CFM (238 m³/hr).

This means it’s suitable for rooms up to 217 sq. ft. (20.2 m²), where it will clean the air 4.8 times per hour.

One unique aspect of this air purifier is that each available filter has a different structure (density), allowing varying amounts of air to pass through and thus limiting the device’s CADR values. We tested the Mila that’s equipped with The Big Sneeze filter, which has a slightly higher CADR than the Energy Star rating states, so we tested it in a room larger than the recommended size.

In addition to the tests I will present below, I also used the Mila air purifier at home for some time. I found that while The Big Sneeze filter isn’t particularly effective at neutralizing odors, it works very well for capturing airborne dust, pollen, pet hair, and similar particles.

Testing in a 194 sq. ft. (18 m²) Room

In the first test, performed in a 194 sq. ft. (18 m²) room, the Mila air purifier delivered outstanding performance.

In just 60 minutes at maximum speed, the Mila reduced PM2.5 particulate matter from 137 to 8 µg/m³, achieving an air quality improvement of 94%.

This is an impressive result, even though the room we tested it in was slightly smaller than the recommended size.

Testing in a 320 sq. ft. (30 m²) Room

In the second test, we tested the Mila air purifier in a room larger than the recommended size.

The room we tested it in is 320 sq. ft. (30 m²). We ran the Mila at maximum speed for 60 minutes and measured the air quality improvement with a Temtop laser particle meter.

The Mila managed to improve the air quality in this room by 91%, which is an impressive result, especially considering it exceeds the recommended room coverage.

Compared with similar air purifiers, the Mila ranks quite well. The results of this test were the same as those of the Medify MA-25 and Hathaspace HSP001.

However, some more advanced air purifiers, such as the Levoit Core 400S and the Winix 5500-2, performed much better, improving the air quality by 96%.

Overall, the Mila is an outstanding air purifier that delivers impressive performance.

If you’re an active reader of Air Purifier First, you probably know how much I appreciate it when an air purifier has more than three fan speeds. The Mila has ten fan speeds—imagine how excited I’m about that!

In fact, the Mila and the Dyson TP02 are the only two air purifiers with ten fan speeds that I’ve tested.

At the lowest speed, the Mila is relatively quiet, producing a sound of 43.2 dBA, which is suitable even for bedroom use.

In comparison with similar air purifiers, most of the models I’ve tested are slightly quieter at their lowest speeds. For instance, the Winix 5500-2 produces 40.6 dBA, and the Alen FLEX produces 41.2 dBA.

However, at maximum speed, the Mila produces a sound of 73.5 dBA, making it one of the loudest air purifiers we’ve tested.

Overall, while the Mila could benefit from better noise optimization, its ten fan speeds mean that almost everyone will find at least one or two speeds that strike a satisfying balance between noise and performance.

The Mila is the only air purifier from this brand, and they continuously work to improve it by updating parts that haven’t performed as expected.

For example, Mila has upgraded its motor over the past few years. The motor now performs better, is more efficient, and consumes less power.

The version of the Mila I tested uses a 88W motor, which is relatively high. I spoke with the Mila support team about power ratings for newer models and got the info that the latest versions for the US and EU markets use 66.8W at maximum speed—an improvement that reduces power consumption by around 20%.

The Mila air purifier always works, even though the fan is switched to zero speed. This air purifier has an air quality sensor that tracks air pollutants in real time, and it shows the data in the Mila smart app. This means that the Mila uses 6.8W when in standby mode.

At maximum speed, the Mila uses 75.4W, which translates to an additional $6.61 on your electric bill if operated at full speed 24/7 for a month. This is among the highest power usage rates we’ve seen at maximum speed.

For comparison, the Coway AP-1512HH, one of the leading power users at maximum speed based on our tests, still consumes less power than the Mila.

I believe the Mila could benefit from a better-optimized motor to lower its power usage. However, with its ten fan speed options, it’s unlikely this small device will significantly impact your electric bill at the end of the month.

Filtration Technology

This air purifier uses a reliable filtration technology consisting of a HEPA filter and an activated carbon filter.

However, it lacks a pre-filter, which is one of the biggest drawbacks of this model. Without a pre-filter, the main filter requires more frequent replacement. An additional issue here is that the Mila air purifier doesn’t have a filter reset indicator.

So far, the Hathaspace HSP001, Levoit LV-H126, and the Mila are the only air purifiers I’ve tested that lack a filter reset indicator.

On the positive side, Mila offers seven different filtration options for this device.

For this review, I tested the Mila with The Big Sneeze filter, which contains only the HEPA filter and not the activated carbon filter.

The HEPA filter serves as the primary and most critical filtration layer, regardless of which Mila filter variant you choose. This stage effectively removes airborne particles such as dust, pollen, lint, smoke, and similar contaminants.

The second filtration stage (an activated carbon filter), included in five of the seven Mila filter variants, neutralizes odors, VOCs, kitchen smells, and gases.

Below, you’ll find a table with the specifications and key characteristics of each Mila air purifier filter variant.

	HEPA Efficiency	Carbon Weight
The Basic Breather	99.6%	N/A
The Big Sneeze	99.97%	N/A
The Rookie Parent	99.6%	0.70 lb (318g)
The Critter Cuddler	99.97%	0.84 lb (381g)
The Home Wrecker	99.6%	1.96 lb (889g)
The Mama-to-Be	99.995%	0.70 lb (318g)
The Overreactor	99.995%	1.25 lb (567g)

No matter which filter you pick, the Mila will deliver high-quality, efficient filtration.

For the best overall performance, I recommend The Overreactor filter. However, if you’re specifically looking for a filter that excels at odor neutralization, The Home Wrecker is an excellent choice.

How to Replace the Mila Air Purifier Filter?

I’ve mentioned this before, but it’s worth repeating: the Mila air purifier doesn’t have a filter reset indicator, which is one of the biggest drawbacks of this smart air purifier.

All filter variants last about six months, and because there’s no filter reset indicator, keeping track of replacement filter time is truly annoying.

Fortunately, the process of replacing the filter is straightforward, requires only a few steps, and doesn’t take much time to complete.

Design

Let me be clear: this is the best-designed air purifier I have ever seen.

With premium build quality, high-quality plastic, fine details that enhance its premium look, and wooden legs, the Mila air purifier truly stands out.

The Mila has small holes on all sides of its body; it’s slightly elevated from the bottom and is primarily white, except for the top part and control panel, which are black. It’s also available in a completely black variant.

It doesn’t have handles for carrying, but trust me, you won’t need them—this is a compact and easy-to-move air purifier.

I’m sure this device will fit perfectly into almost any setting and add a touch of elegance to your space.

If design matters to you, I’m sure you won’t find a better-designed or more beautiful air purifier than this one.

Display and Controls

The control panel is located on the top, and honestly, it’s not the best I’ve seen. It features only three touch buttons for basic control, so you’ll need to connect it to the Mila smart app for advanced settings and to unlock the full potential of your air purifier.

On this panel, you’ll find a mode button in the center and fan speed controls on each side.

There’s also an on/off button located at the bottom of the device, which means you can’t turn the air purifier off through the app. You can only set the fan speed to zero, which essentially turns it off.

What you also should know is that every time you turn on your Mila, it will go into Calibration Mode, which can be a bit annoying if you frequently switch the device on and off.

Airflow

The Mila air purifier has openings for letting the air in, which are located at the bottom part of the device and are arranged through all the sides of the device.

The air is then filtered and exits through the fan grilles at the top.

Size and Dimensions

The dimensions of the Mila air purifier are 12 x 12 x 15 inches (30.5 x 30.5 x 38.1 cm). It weighs 18 lb (8.2 kg).

What’s in the box?

When you purchase the Mila air purifier, you’ll get 1x Air Purifier, 1x Selected Filter, 1x Power Cord, and 1x User Manual.

Before the first start of your air purifier, please unwrap the filter from the plastic wrap.

Features Overview

What’s interesting about the Mila is that, despite being one of the smartest air purifiers I’ve ever tested and having plenty of smart features, it lacks a simple feature like a filter reset indicator.

However, it does include plenty of innovative and unique features, which I’ll explain in the sections below.

Air Quality Sensor

The Mila has the most accurate air quality sensor I’ve seen on an air purifier, using eight different sensors to provide a comprehensive view of your indoor air quality.

The sensors work in real-time and collect all the data one needs to know about indoor air quality.

The sensor can detect PM1, PM2.5, PM10, VOCs, CO2, CO1, temperature, and humidity.

I compared its accuracy with the Temtop laser particle meter I use for testing air purifiers, and both devices consistently showed almost identical readings, which further confirmes the accuracy of Mila’s air quality sensor.

This sensor works in combination with other features to make the Mila even smarter and more valuable for users.

Air Quality Data

Air quality data readings are displayed in a simple way on the control panel, with more detailed information available through the smart app.

In the app, you can view current and historical air quality data for all eight parameters.

Auto Mode

Auto mode is another feature that works in combination with the air quality sensor.

Simply put, when in auto mode, the Mila air purifier adjusts the fan speed based on the current air quality.

You can also set a target AQI (Air Quality Index) through the app, and the Mila will work to reach that goal as quickly as possible.

The Bubble Boy

It lets Mila do whatever it takes to clean the air in the room, regardless of the noise level.

Child Lock Mode

This feature is useful if you want to lock your air purifier and prevent any changes to the settings through the device’s control panel.

Energy Save Mode

The Energy Save Mode is similar to the ECO Mode on Coway air purifiers. Simply put, the air purifier will turn off the fan and all lights when the AQI reaches zero (indicating good air quality).

Housekeeping Service

When this feature is active, the Mila will work to clean the air as quickly as possible, using the highest fan speed necessary—but only if it detects there is no one in the room.

This feature is operated by the Mila’s built-in motion detection sensor.

Quiet Mode

This mode reduces the fan speed to a whisper-quiet level when someone is in the room.

Sleep Mode

This is an innovative version of sleep mode. When you’re asleep, the Mila will turn off the lights, lower the fan speed, and minimize fan fluctuations.

Turndown Service

It even tracks your bedtime! You can enable a “turndown” that switches the air purifier on one hour before so the air is cleaned just before you go to sleep.

Whitenoise Mode

I especially like this mode. It simply works as a white noise, giving one more feature to your device.

Warranty

The Mila air purifier comes with a one-year warranty. However, there is also a 30-day Mila-backed guarantee if you buy it through the Mila website.

Mila Smart App

What makes the Mila the smartest air purifier ever is its feature-rich smart app.

The first thing I want to highlight is the straightforward pairing process when connecting the air purifier and your phone, which is hassle-free. I mention this because many premium air purifiers come with unreliable or unusable apps, such as the Molekule Air.

The Mila app is available for both Android and iOS devices. After installation, you simply register on Mila, add the device, and pair it with the app. Just follow the on-screen instructions, and that’s all you need to do.

Main Dashboard and Controls

On the main dashboard, you’ll see only the most important information about your Mila. When you touch on the air purifier icon, you’ll go to the main control screen, where you have full control over your Mila.

In addition to air quality data and current settings, you can press the control center button to access remote control options.

Here, you’ll find options to set the target AQI, a slider to adjust the fan speed manually, and, at the bottom, an option to switch to auto mode.

In the bottom right corner, there’s a magic wand icon that opens a screen to customize the auto mode settings to your preference.

Air Quality Data Report

If you return to the main control screen and scroll down a bit, you’ll see a display showing the current air quality for a selected time period, with options to view data by hour, day, week, or month.

Scrolling further reveals the current air quality readings from all eight of the Mila air purifier’s sensors, including PM1, PM2.5, PM10, Humidity, Temperature, VOCs, CO2, and CO.

Tapping on any of these readings will open a screen with historical data and an explanation of each measurement.

The app also offers many other features for you to explore on your own, including alerts, room settings, and a chat with the Mila AI assistant.

How Long Do Mila Air Purifiers Last?

While researching Mila air purifiers, I came across many posts, especially on Reddit, discussing various problems users have experienced with their Milas.

One of the most common issues people mention is that their Mila air purifier stops working, which is relatively uncommon with other air purifier brands.

However, after further investigation, I found that Mila has upgraded its motor and improved the overall lifespan of it, so newer versions of the purifier are less likely to stop working unexpectedly.

Additionally, the Mila support team is excellent and always ready to assist if you encounter any issues with your unit. There are many examples of users receiving replacement units, sometimes multiple times.

Mila is aware of these concerns and is committed to providing exceptional after-sale support to ensure customer satisfaction.

FAQ on Mila Air Purifier